Panasonic WJ-HD200 - Manual (Page 50)

50
6. Repeat from step 1 to search for another time and date
or press the [TIME & DATE SEARCH] button to cancel
the function. Pressing the [STOP] button will also end
the searching.
Note: Searching may take the recorder 18 seconds at
worst
■ Multi-screen Playback
You can view a multiple playback image displayed in 4-split
or 9-split pattern on the monitor at a time.
• Normal Playback
Press the [PLAY] button to start normal playback. The
image data recorded on the disk are sequentially
played back, and the monitor displays images in the
single display mode or multi-screen display mode.
• Multi-screen Playback
Press the [MULTI SCREEN SELECT] button appropriate
times. The monitor display changes as follows. The
LED’s in the [MULTI SCREEN SELECT] button and
respective input buttons will light up.
Single Image
→
Quad A (4A/comprising input 1, 2, 3,
and 4)
→
Quad B (4B/ input 5, 6, 7, and 8)
→
Nine-spit
(input 1 – 8)
→
Quad A
→
Quad B
→
Nine-split
• Specific Input Playback
Press the respective input button. The images of the
selected input is continuously played back and dis-
played on the monitor.
• STOP Playback
Press the [STOP] button to stop playback.
Note: when the playback proceeds to where recording
is executed on the disk, the recorder will pause
playback and freeze the displayed image on the
monitor.
4. Press the [PLAY] button to play back the searched
record.
5. Press the [STOP] button to stop playback.
Note: “Alarm Search Playback” and “Alarm Log Recall”
are similar, but different in operations. Refer to ■
Alarm Log Recall & Search on page 46.
■ Time & Date Search Playback
A picture record of a specified time and date is played
back.
1. Press the [TIME & DATE SEARCH] button. The LED in
the button lights up. The monitor displays the time &
date search window.
2. Press the [D] or [C] button to move the cursor to the
next position.
3. Rotate the JogDial clockwise to increase the parameter
or counter-clockwise to decrease it.
4. Repeat the steps 2 and 3 above until the desired para-
meters are selected.
5. Press the [PLAY] button to start playback. The monitor
displays the single spot image when an input is select-
ed or nine-split image when all input is specified. The
recorder stops searching when the playback reaches to
the end of the record.
HDD
FULL
ERROR
MULTI SCREEN
SELECT
ZOOM
ALARM
SERCH
STOP
PLAY MODE SELECT
SETUP
/ESC
PLAY REC
JAN31.03 23:00:00
TO SEARCH PUSH PLAY KEY
5
1 3
PLAY
TIME&DATE
SEARCH
REC STOP
ALARM
RECALL
REC
PUSH— PAUSE SET
2