Panasonic WJ-HD200 - Manual (Page 73)

74
8 Time & Date Search button (Time&Date Search)
Clicking the button will display the time and date search
dialog.
1. Specify the date, and time.
2. Click the [OK] button.
The image will be searched, and displayed in the
image area.
Note: Searching may take 18 seconds at worst particularly
when the recorder runs simultaneous recording and
playback, and/or when the targeted image has a small
size.
8 Camera Control View button (Camera Control
View)
Clicking the [Camera Control View] button opens the
window.
Camera Select button displays the live image of the
selected camera number.
Main Control Panel tab returns the window back to the
main control panel.
ZOOM (WIDE/TELE) buttons zoom in or out the image.
FOCUS (FAR/NEAR/AUTO) buttons adjust the focus of
the image. When AUTO is clicked, the camera will
adjust the focus by itself.
IRIS (CLOSE/OPEN/RESET) buttons adjust the iris of
the image. When RESET is clicked, the iris will return to
the factory default setting.
AUTO PAN (ON/OFF) buttons allow the camera to turn
the preset range endlessly.
PRESET allows the camera to turn to the preset posi-
tion specified by the number.
PAN/TILT Control:
Clicking the desired direction in the image display area
will move the camera if it is mounted on a pan/tilt table.
The image display area is assigned panning/tilting
function together with the mouse click. Each of 25-split
(5x5) areas is invisible, but represents moving direc-
tions: up, down, right or left.
UP
DOWN
LEFT RIGHT