Panasonic WJ-HD200 - Manual (Page 34)

34
● Time Adjust Setup TIME ADJUSTING
IN and OUT terminals for a calibration signal are provided
on the rear panel. The master unit supplies the calibration
signal to the slave units one time at the specific hour every-
day. The slave unit accepts the signal through the IN termi-
nal, and corrects its internal timer to the hour as far as the
clock deviates within 15 minutes after or before the hour.
This is convenient for synchronizing the internal clock with
other connected devices.
1. Move the cursor to TIME ADJUST SETUP O in the SYS-
TEM SETUP with the [D] or [C] button, and press the
JogDial. The TIME ADJUST SETUP menu appears.
2. Select either MASTER or SLAVE with the JogDial, and
press the JogDial.
The default is SLAVE.
MASTER: The recorder supplies the calibration OUT
signal to the slave units.
SLAVE: The internal timer of the recorder is supplied
the calibration signal from the master.
3. Select the hour with the JogDial, and press the JogDial.
The hours: From 00:00 to 23:00
Note: You need not set the hour when SLAVE is select-
ed.
4. Press the [SETUP/ESC] button to go back to the SYS-
TEM SETUP menu.
● Auto Erasing Setup AUTO ERASING
The redundant records on the disk can be erased every
day at 24:00 midnight. Day numbers specified by this set-
ting means that the records during the number of days from
the present will be protected, while the records older than
that of the protected day will be erased.
1. Move the cursor to AUTO ERASING with the [D] or [C]
button.
2. Select the desired day number with the JogDial, and
press the JogDial.
OFF: Auto erasing is not applied.
1 DAY: Only today’s records of 00:00 onward are pro-
tected. Records before 24:00 of yesterday are
erased.
2 to 10DAYS: Records before specified number of
days are erased.
14, 30, 45, 60, 90, 120, 150, 180DAYS: Same as
above.
Notes:
• The day number includes today as 1 day, therefore
2DAYS counts today and yesterday in number.
• Auto erasing is implemented at 24:00 midnight.
Playing back will stop once when the time comes to
24:00, then will restart with different portion based
on the renewed day count.
SYSTEM SETUP (2 OF 2)
PLAY PRIORITY LOCAL
TIME ADJUST SETUP O
AUTO ERASING OFF TIME ADJUST SETUP
TIME ADJUSTING SLAVE
SET TIME
→
9:00