Network setup network setup, Line speed (line speed), Http server port (http server port) – Panasonic WJ-HD200 User Manual
Page 64: Host name (host name), Dhcp on/off (dhcp on/off), Domain name service (domain name), Dynamic dns, Simple network management protocol, Camera number setup cam no. setup (only for ps, Data)
65
Configuration Protocol).
IP Address (IP ADDRESS)
The IP address is displayed. Enter from the keyboard.
Netmask (NETMASK)
The netmask is displayed. Enter from the keyboard.
Default Gateway (DEFAULT GATEWAY)
The default gateway is displayed. Type in from the key-
board.
8
Domain Name Service (DOMAIN NAME)
OFF:
Disables DNS, only IP address usable.
MANUAL:
Enables DNS.
AUTO:
Enables DNS.
Domain Name
Enter from the keyboard.
DNS Server Address
Enter from the keyboard.
8
Dynamic DNS
OFF:
Does not use DDNS.
ON:
Uses DDNS.
DNS User Name
Enter from the keyboard.
DNS Password
Enter from the keyboard.
DNS Access Interval
Enter from the keyboard.
8
Simple Network Management Protocol
SNMP Community
Enter from the keyboard.
SNMP Contact
Enter from the keyboard.
■
Camera Number Setup CAM NO.
SETUP (only for PS
•
DATA)
Assignable number:
From 1 to 128, must be unique in
the chain.
Click the [SET] button if all are adequately set.
■
Network Setup NETWORK
SETUP
8
Line Speed (LINE SPEED)
AUTO:
The speed is automatically selected.
100Mbps (FULL DUPLEX):
100 mega byte, full duplex
100Mbps (HALF DUPLEX):
100 mega byte, half
duplex
10Mbps (FULL DUPLEX):
10 mega byte, full duplex
10Mbps (HALF DUPLEX):
10 mega byte, half duplex
8
HTTP Server Port (
HTTP SERVER PORT
)
Enter from the keyboard. The default setting is 80.
8
Host Name (HOST NAME)
The host name is displayed. Enter from the keyboard.
8
DHCP On/Off (DHCP ON/OFF)
Select ON or OFF for DHCP (Dynamic Host