Requesting a trace route, Requesting a powergate outlet command, Requesting a picture from a camera – Phonetics IMS-4000 User Manual
Page 74
Requesting a Trace Route
To request an IP trace-route, send an e-mail message to your IMS-4000 Host with the following
information:
To: <e-mail address of your IMS-4000>
Subject: ims4000
username: <valid profile username>
email: <your e-mail address>
command: traceroute xxx.xxx.xxx.xxx
Requesting a PowerGate Outlet Command
To request a PowerGate Outlet command, send an e-mail message to your IMS-4000 Host with the
following information:
To: <e-mail address of your IMS-4000>
Subject: ims4000
username: <valid profile username>
email: <your e-mail address>
command: powergate "<PowerGate Name>" "<Outlet Name>" on/off/cycle
For example:
To: [email protected]
Subject: ims4000
username: jsmith
email: [email protected]
command: powergate "Gear Rack #1" "Netgear switch #3" cycle
Requesting a Picture from a Camera
You can receive an e-mail with an attached picture from any camera configured in the IMS-4000.
The picture will be captured when the IMS-4000 receives the e-mail request.
To receive a picture, send an e-mail message to your IMS-4000 Host with the following informa-
tion:
To: <e-mail address of your IMS-4000>
Subject: ims4000
username: <valid profile username>
email: <your e-mail address>
command: camera <camera name>
For example:
To: [email protected]
Subject: ims4000
username: jsmith
email: [email protected]
command: camera NY Datacenter
IMS-4000 Manual
74