Phonetics IMS-4000 - Manual (Page 90)

(“IMS-4000,” for example), choose your modem, and enter the telephone number of your IMS-
4000. When you’re finished, an icon should appear with the name you provided. Double-click on
this icon. Enter a Username and Password which matches a Profile Username and Password in
your IMS-4000. Click Connect to have your modem dial up your IMS-4000.
Note: If Dialup Networking is not listed it may not be installed on your computer, in which case
you will need to use your Windows installation CD to add it.
Windows 2000
To configure Dial-up Networking, double-click on My Computer from the desktop or click the Start
button and select Settings>Control Panel. Double-click on the icon called Network and Dialup
Connections. Double-click on Make New Connection. Follow the prompts to create a new connec-
tion. For the Network Connection Type choose Dial-up to Private Network. Enter the telephone
number of your IMS unit and assign a name to the connection (“IMS-4000,” for example). When
prompted to enter your Username and Password be sure to enter information which matches a
Profile Username and Password in your IMS-4000.
Note: If Dialup Networking is not listed it may not be installed on your computer, in which case
you will need to use your Windows installation CD to add it.
Windows XP
To configure Dial-up Networking, double-click on My Computer, then select My Network Places,
then View Network Connections. Select Create a New Connection or click on the Start button, then
Programs>Accessories>Communications>New Connection Wizard. Follow the prompts to create
a new connection. On the Network Connection Type screen, select Connect to the Network at my
Workplace. For the network connection choose Dial-up. Enter a name for the connection (“IMS-
4000,” for example) and the IMS-4000 telephone number when prompted. Finish the setup. When
prompted to enter your Username and Password be sure to enter information which matches a
Profile Username and Password in your IMS-4000.
Communicating with your IMS-4000
Double-click on the Dial-up Networking icon you just created above. This should make your
computer dial your IMS-4000 and connect. Once a connection is established, run the IMS-4000
ConsoleView Software by double-clicking on the IMS-4000 icon on your desktop. At this point you
should be communicating with your IMS-4000. To disconnect, close the IMS-4000 Software and
then disconnect the Dial-up Networking connect
IMS-4000 Manual
90