Panasonic AJ-HD3000 - Manual (Page 126)

– 126 –
INTERFACE SET UP menu
∑ Setting the RS-232C parameters
(1) Press the F2 (RS-232C) key to set it ON.
The parameter display now appears.
BAUD RATE: 300, 600, 1200, 2400, 4800, 9600 bps
DATA LENGTH: 7 or 8 bits
START BIT:
1 bit, fixed
STOP BIT: 2 or 1 bit
PARITY: None, odd or even
(2) Press the center cursor key.
The input area now blinks.
(3) Press the cursor keys to select the input area.
The cursor moves on a block by block basis when the F key
and cursor key are pressed together.
BAUD RATE:
(4) Press the center cursor key to set the parameter.
BAUD RATE:
(5) Press the ENT key to enter the setting.
∑ Setting the V/A control parameters
The AV control parameter is fixed at the baud rate of 1200 bps.
9600
4800