Panasonic AJ-HD3000 - Manual (Page 157)

– 157 –
AUDIO TEST menu
This menu is displayed by pressing the following keys: >
F3 TEST
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
Key designation
CH-1
CH-2
CH-3
CH-4
CUE
MONI.L
MONI.R
EXIT
REF.LEV
IMPED.
——
OUT LEV.
IN LEV.
Description
Sets the CH1 analog input/output reference level.
Sets the CH2 analog input/output reference level.
Sets the CH3 analog input/output reference level.
Sets the CH4 analog input/output reference level.
Sets the CUE input/output reference level.
Sets the monitor L channel output reference level.
Sets the monitor R channel output reference level.
Returns the VTR to the TEST menu screen.
Sets the PCM audio reference level. (This can be done only in
the servicing engineer mode.
≥ When the F9 and F keys are pressed together, the reference
level (Fs) toggles between
j 18 dB and j 20 dB.
Sets the input impedance. (This can be done only in the
servicing engineer mode.)
≥ When the F10 and F keys are pressed together, the input
impedance is toggled between 600 ohms and HIGH.
Sets the analog output reference level.
≥ When the F12, BS and F keys are pressed together, the names
of the F1 to F7 menus are displayed, and switching between
them is acknowledged.
Sets the analog input reference level.
≥ When the F12, BS and F keys are pressed together, the names
of the F1 to F5 menus are displayed, and switching between
them is acknowledged.