Panasonic AJ-HD3000 - Manual (Page 59)

– 59 –
AUDIO IN CH-MIX SELECT menu
∑ Mix-and-record
(1) Press the F6 (CH-MIX) key to set it ON.
The mixing graph display now appears.
(2) Press the center cursor key to display the cursor.
(3) Use the cursor keys to move the cursor to the channel in which the sound is to be mixed.
(4) Press the center cursor key to select the signals to be mixed.
The desired signals can be set on a channel by channel basis.
The following signals can be set:
CH-1S CH-2S CH-3S CH-4S CH-5S CH-6S CH-7S CH-8S (input
signals of each channel)
CH-1T CH-2T CH-3T CH-4T CH-5T CH-6T CH-7T CH-8T (play-
back signals of each channel)
OFF (no mixing)
≥ The same signal cannot be selected for one channel.
Center cursor key
Cursor key