Panasonic AJ-HD3000 - Manual (Page 150)

– 150 –
OPERATION ENGINEER SET UP menu
Key
F1
F2
F3–F7
F8
F9–F11
F12
F13
Key designation
EJECT LED
STILL STEP
——
EXIT
——
ACCEL
KNEE
Description
Enables the lighting conditions of the EJECT button’s LED to be
selected.
MODE 1: The LED lights during the time starting when the VTR
is transferred to the eject mode until the cassette is
ejected or when cassette unloading is completed. (It
lights during the unloading period and in the EJECT
mode.)
MODE 2: The LED lights during the time starting when the VTR
is transferred to the eject mode until the cassette is
ejected. (It lights only during the unloading period.)
ON: When the stop/still mode holding time is set to 5 min with
the F12 (STILL) key of the HOME SET UP menu and then
this F2 key to ON, still time can be extended to 30 minutes
moving the tape back and forth slightly. The tape is moved
one frame amount every 2 minutes elapsed, and the tape
movement is stopping within about
n 2 frames from the
beginning point of this mode. The VTR is transferred to
the tape tension release (loosing) mode in order to
prevent the tape damage after 30 minutes has elapsed.
Note that the CUE audio is output while the STILL STEP
mode is activated. This function does not work other than
5 min in the F12 (STILL) key setting of the HOME SET UP
menu.
OFF: STILL STEP does not function.
When the stop/still mode holding time has elapsed, the
VTR is transferred to the tape tension release (loosing)
mode.
Returns the VTR to the ENGINEER SET UP menu screen.
Selects how far to accelerate the reel at a speed under multiple
speed selected by F13 (KNEE) during a FF or REW operation (in
the SHTL mode).
MAX:
Maximum acceleration is applied at all times.
MIDDLE: Medium acceleration as far as the knee is applied.
(This is the default value.)
MIN: The acceleration as far as the knee is reduced.
≥ When the MAX setting is selected, there is no knee due to the
maximum acceleration.
≥ There is no knee when an L-size cassette is used.
Selects the multiple of the normal speed at which the reel speed
is to be transferred from the acceleration selected by F12
(ACCEL) to maximum acceleration during a FF or REW
operation (in the SHTL mode).
t 8: 8 k normal speed
t 15: 15 k normal speed
t 20: 20 k normal speed
t 30: 30 k normal speed