Panasonic AJ-HD3000 - Manual (Page 76)

– 76 –
TC/CHR menu
Description
ON: CF BIT is recoorded.
OFF: CF BIT is not recorded.
≥ When [EXT LTC], [S VITC] or [S LTC] is selected in the F1 key,
the VTR conforms to the external color frame bit.
Transfers the VTR to the TC/CHR SET UP menu screen.
Transfers the VTR to the TC/CHR CONVERT menu screen.
LTC: LTC is read out all the time.
AUTO: At low speed, VITC is read preferentially. When it is not
read, then LTC is read.
VITC: VITC is read out all the time.
≥ In either setting, when the time code cannot be read, values
corrected by control signal are read out. (Interpolation mode is
assumed and [INTRP] is displayed on the HOME menu.)
TC.ST: The time code and VTR operating mode are
superimposed.
TC.ST.RT: The time code, VTR operating mode and remaining
tape time are superimposed.
TC.UB: The time code and user’s bit are superimposed.
TC.TC: The time code is displayed in two steps.
Both the original time code information and the time
code information in the format to which it has been
converted can be displayed at the same time. (Refer
to the note on the next page.)
TC: Only the time code is superimposed.
OFF: Nothing is superimposed.
ERR/FMT: When there are warnings, warning displays appear.
When there are no warnings, the system format and
tape format frequencies are displayed.
ERR: The warning displays or format information are
superimposed onto the screen.
OFF: The warning displays or format information are not
superimposed.
REVERSE: Characters appear against a black background.
INTENSE:
Characters are displayed more intensely.
Key
F6
F7
F8
F9
F10
F11
F12
F13
Key designation
CF BIT ° 1
For selecting the color
frame bit ON/OFF during
recording.
——
SETUP
CONVERT ° 2
TCR
For selecting time code
read out mode.
SUPER
For setting superimpose.
EX SUPER
CHR TYPE
For selecting type of
character to be
superimosed.
° 1 This is displayed only when the 480/59.94i or 576/50i system format has been selected.
° 2 This is displayed only when the 1080/23psf, 1080/23p, 1080/24psf, 1080/24p, 1080/25psf, 1080/25p or 1080/50i
system format has been selected.