Panasonic AJ-HD3000 - Manual (Page 51)

– 51 –
AUDIO IN PCM INPUT SELECT menu
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9
Key designation
CH-1
For selecting the recording
signals of digital audio
CH1.
CH-2
For selecting the recording
signals of digital audio
CH2.
DIGITAL
For selecting the CH1 and
CH2 digital input signals.
CH-3
For selecting the recording
signals of digital audio
CH3.
CH-4
For selecting the recording
signals of digital audio
CH4.
DIGITAL
For selecting the CH3 and
CH4 digital input signals.
DIGITAL
For selecting the CH5 and
CH6 digital input signals.
EXIT
CH-5
For selecting the recording
signals of digital audio
CH5.
Description
ANALOG: Selects the signals of the analog CH1 input
connector.
DIGITAL: Selects the digital audio input signals (AES/SDI
selection is made in line with the CH2 setting using
F3).
INT SG: Selects the internal generator signals.
For selecting the recording signals of digital audio channel 2.
ANALOG: Selects the signals of the analog CH2 input
connector.
DIGITAL: Selects the digital audio input signals (AES/SDI
selection is made in line with the CH1 setting using
F3).
INT SG: Selects the internal generator signals.
AES: Selects the AES digital audio input signals.
SERIAL: Selects the serial input signals.
ANALOG: Selects the signals of the analog CH3 input
connector.
DIGITAL: Selects the digital audio input signals (AES/SDI
selection is made in line with the CH4 setting using
F6).
INT SG: Selects the internal generator signals.
ANALOG: Selects the signals of the analog CH4 input
connector.
DIGITAL: Selects the digital audio input signals (AES/SDI
selection is made in line with the CH3 setting using
F6).
INT SG: Selects the internal generator signals.
AES: Selects the AES digital audio input signals.
SERIAL: Selects the serial input signals.
AES: Selects the AES digital audio input signals.
SERIAL: Selects the serial input signals.
Returns the VTR to the AUDIO IN menu screen.
ANA CH1: Selects the signals of the analog CH1 input
connector.
DIGITAL: Selects the digital audio input signals (AES/SDI
selection is made in line with the CH6 setting using
F7).
INT SG: Selects the internal generator signals.