Panasonic AJ-HD3000 - Manual (Page 43)

– 43 –
VIDEO OUT CONVERT HD_TO_SD menu
This menu is displayed by pressing the following keys: ) )
F1 F10 VIDEO OUT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
FLD FIT_H
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9–F13
Key designation
MODE
RESPONSE
ENHANCE
——
V_FILTER
V_EXTEND
——
EXIT
——
Description
Selects the aspect ratio at which signals are output from the down-converter.
FIT_V:
Changes the magnification by matching the input size
to the output size along the vertical axis. (The aspect
ratio remains the same.)
FIT_H: Changes the magnification by matching the input size
to the output size along the horizontal axis. (The
aspect ratio remains the same.)
FIT_HV: Changes the magnification by matching the input size
to the output size along the horizontal and vertical
axes. (The aspect ratio may be distorted.)
14:9: Sets the aspect ratio to 14 k 9.
13:9: Sets the aspect ratio to 13 k 9.
° When the 525p (480/59.94p) has been selected for the SD SDI
MAIN output, the aspect ratio remains fixed at 16:9.
Selects the frequency bandwidth of the down-converter output signals.
STANDARD/WIDE/NARROW
Controls the enhancement adjustment of the down-converter output signals.
0dB/1.5dB/3dB/6dB
This item appears only when the 1080p (psf) has been selected
as the system format.
This is the extension function for vertical frequency characteristic
in down converter output signals.
FLD:
Filter field processing
FRM: Filter frame processing
FRM2: This item appears only when the 1080/23p (psf) has
been selected as the system format. F10 to F13 key
menus are displayed when FRM2 has been selected,
and then the horizontal and vertical characteristics can
be controlled independently. (See page 44.)
This item appears only when the 1080/59i has been selected as
the system format. (See page 45.)
Selects ON or OFF.
F10 to F13 key menus are displayed when ON has been
selected, and then the horizontal and vertical characteristics can
be controlled independently.
Returns the VTR to the VIDEO OUT CONVERT menu screen.