Planet Technology IDL-2402 - Manual (Page 166)

interfaces. For a similar traffic descriptor type that can be accepted at UNI
3.0 and UNI 3.1 interfaces, see "atmNoClpNoScr".
[Policed VBR1] atmNoCLPScrCdvt:
This traffic descriptor type is for no CLP with Sustained Cell Rate and CDVT.
This traffic descriptor type is applicable to VBR connections following the
UNI 3.0/3.1 conformance definition for PCR CLP=0+1 and SCR CLP=0+1.
These VBR connections differ from VBR.1 connections in that the CLR
objective applies only to the CLP=0 cell flow.
[Policed VBR2] atmCLPNoTaggingScrCdvt /
[Shaped VBRNRT] atmCLPNoTaggingScrCdvt:
This traffic descriptor type is for CLP with Sustained Cell Rate and CDVT
and no tagging. This traffic descriptor type is applicable to connections
following the VBR.2 conformance definition.
[Policed VBR3] atmCLPTaggingScrCdvt:
This traffic descriptor type is for CLP with tagging and Sustained Cell Rate
and CDVT. This traffic descriptor type is applicable to connections following
the VBR.3 conformance definition.
[Policed UBR1] atmNoCLPNoScrCdvt:
This traffic descriptor type is for no CLP with CDVT and no Sustained Cell
Rate. This traffic descriptor type is applicable to
CBR connections following the UNI 3.0/3.1 conformance definition for PCR
CLP=0+1. These CBR connections differ from CBR.1 connections in that
the CLR objective applies only to the CLP=0 cell flow. This traffic descriptor
type is also applicable to connections following the UBR.1 conformance
definition.
[Policed UBR2] atmNoCLPTaggingNoScr:
This traffic descriptor type is for no CLP with tagging and no Sustained Cell
Rate. This traffic descriptor type is applicable to connections following the
UBR.2 conformance definition.
[Shaped UBR] atmNoCLPNoScr:
This traffic descriptor type is for no CLP and no Sustained Cell Rate
[Shaped VBR] atmCLPTransparent:
This traffic descriptor type is for the CLP- transparent model with Sustained
Cell Rate. This traffic descriptor type is applicable to connections following
the VBR.1 conformance definition. Connections specifying this traffic
descriptor type will be rejected at UNI 3.0 or UNI 3.1 interfaces. For a
similar traffic descriptor type that can be accepted at UNI 3.0 and UNI 3.1
interfaces, see "atmNoClpScr".
- 166 -