Planet Technology IDL-2402 - Manual (Page 63)

4.1.2 Board IP Setup
This option allows you to configure the in band IP address setting, VID management
setting, HTTP port setting, etc. From the System menu, click on Board IP Setup. The
following page is displayed:
Board IP Setup Table
Label Description
IP Address Type in the IP address of the DSLAM for in-band management.
In Band
Address
Subnet Mask Type in the in-band subnet mask of the DSLAM.
No Limit VID
Select this checkbox if no specific in-band management VLAN is
required, and the setting in "Limit VID" parameter will be ignored.
Limit VID The VLAN ID for individual in-band management VLAN.
Inband VID
Management
Priority
Select the VLAN priority level (0~7) of the in-band management traffic
sent out from GBE port.
HTTP Port
Shows current HTTP port setting for Web access. You can modify http
port setting in this field.
Remote IP
Shows the IP address of the management PC currently connected to
this DLSAM.
System Name You can modify the name of the system here.
Modify Click on this button to submit the modification.
RESTART Click on this button to restart the system.
- 63 -