Planet Technology IDL-2402 - Manual (Page 243)

5.3.104 show runningcfg interface xdsl
Description Display running config by XDSL interface
Syntax show runningcfg interface xdsl <port>
Parameter
Name Description
port XDSL Port number
Valid values: 1~24(48)
Default value: -
Type: Mandatory
5.3.105 show snmp
Description Display SNMP community/notify/target setting
Syntax show snmp {community | notify | target}
Parameter None
5.3.106 show sntp
Description Display SNTP setting
Syntax show sntp
Parameter None
5.3.107 show syslog server
DescriptionDisplay IP address of the syslog server
Syntax show syslog server
Parameter None
5.3.108 show system
Description Display system information/inventory/name/performance
Syntax show system {information | inventory | name | performance}
Parameter None
5.3.109 show tcm config
Description Display TCM (Three-Color Marking) Policer configuration
Syntax show tcm config
Parameter None
5.3.110 show tcm-policer
Description Display TCM Policer Binding Table
Syntax show tcm-policer
Parameter None
- 243 -