Planet Technology IDL-2402 - Manual (Page 265)

5.4.73 remotecfg login
Description Login FTP server to get remote configuration and load it to running
configuration or write remote configuration to memory
Syntax remotecfg login <ipv4 address> get <filename> {load | write partition
<number>}
Parameter
Name Description
<ipv4 address> IP address of TFTP server.
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Mandatory
<filename> Remote path and file name (max 31
character)
Default value: -
Type: Mandatory
<number> Partition number
Valid values: 1~2
Default value: -
Type: Mandatory
5.4.74 restore-factory
Description Restore factory setting (User needs to restart the system after
restore-factory to make the setting take effect.)
Syntax restore-factory
Parameter None
5.4.75 rmon alarm <index> alarm_interval
Description Set RMON alarm interval
Syntax rmon alarm <index> alarm_interval <number>
Parameter
Name Description
<index> RMON alarm entry index
Valid values: 1~64
Default value: -
Type: Mandatory
<number> Alarm interval.
Valid values: 0~2147483647 (0: disable)
- 265 -