5 ethernet interface mode commands, 1 bridge, 2 gbe admin – Planet Technology IDL-2402 User Manual
Page 288: 3 gbe speed, 1 bridge 5.5.2 gbe admin 5.5.3 gbe speed
Advertising
5.5 Ethernet Interface Mode Commands
The commands in this section can be executed only in the Ethernet Interface execution
mode.
5.5.1 bridge
Description
Enter bridge configuration mode / Set bridge port to default status
Syntax
bridge [default]
Parameter None
5.5.2 gbe admin
Description Set Gigabit Ethernet administrative status (ON/OFF)
Syntax
gbe admin {on | off}
Parameter None
5.5.3 gbe speed
Description Set Gigabit ethernet speed to auto-negotiate, 100Mbps half
duplexing, or 100Mbps full duplexing
Syntax
gbe speed {auto | half_100mbps | full_100mbps }
Parameter None
- 288 -
Advertising