Planet Technology IDL-2402 - Manual (Page 352)

- 352 -
5.18 Service Profile Configure Mode Commands
The commands in this section can be executed only in the Service Profile execution mode.
5.18.1 bitrate
Description Set downstream/upstream Minimum/Maximum/Planned/L2 minimum
bit rate
Syntax bitrate {ds | us} {min | max | planned | l2} <number>
Parameter
Name Description
number Bit rate (kb/s).
Valid values: 0-65535
Default value: -
Type: Mandatory
5.18.2 delay
Description Set downstream/upstream delay introduced by the interleaving
Syntax delay {ds | us} <number>
Parameter
Name Description
number Delay time (ms).
Valid values: 1-63
Default value: -
Type: Mandatory
5.18.3 l2-packet
Description Set L2 Packet cell
Syntax l2-packet <number>
Parameter
Name Description
number Set L2 Packet cell.
Valid values: 0 ~ 28
Default value: -
Type: Mandatory