Planet Technology IDL-2402 - Manual (Page 298)

- 298 -
5.7.32 pvc atmdesc shp
Description Set ATM shaped (Tx) descriptor
Syntax pvc atmdesc shp <number>
Parameter
Name Description
<number> ATM descriptor number.
Valid values: Enter ‘pvc atmdesc’ command
to see the descriptor list.
Default value: -
Type: Mandatory
5.7.33 pvc encapsulation
Description Set Encapsulation type
Syntax pvc encapsulation {llc | vcmux | auto}
Parameter None
Note: The IDL-2402 supports auto-detection of the ATM AAL5 encapsulation
method, LLC or VC-Mux. Meanwhile, the IDL-2402 is also able to automatically
sense the following protocol encapsulations: PPPoE over ATM (per RFC 2684),
IPoE over ATM bridge mode, and PPP over ATM. IPoA works on individual PVC.
However, there are limitations on auto-detection of encapsulations:
1. LLC/VC-Mux automatically detection is only applicable to PVC#1 ~ PVC#4 of
each ADSL port. PVC#5 ~ PVC#8 must be assigned the ATM AAL5
encapsulation method manually.
2. PPPoA works only for PVC#1 ~ PVC#4.
Refer to section 5.11 for IPoA configuration commands.
5.7.34 quiet-period
Description 802.1x Quiet Period in Seconds (The period that 802.1x system stay
in the quiet state)
Syntax quiet-period <number>
Parameter
Name Description
<number> Timeout for quiet period.