Planet Technology VIP-110 - Manual (Page 10)

8
Convention Description
boldface Commands and keywords are in boldface.
Bold Courier User input (anything you are expected to type in) is set in Bold Courier.
italic Arguments for which you supply values.
courier Messages that the ITG CLI displays are in plain courier font.
[ ] Elements in square brackets are optional.
{ x | y | z }
Alternative but required elements are grouped in braces ({ }) and separated by
vertical bars ( | ).
[ x | y | z ]
Optional alternative keywords are grouped in brackets ([ ]) and separated by
vertical bars ( | ).
“string”
A non-quoted set of characters. Do not use quotation marks around the string
or the string will include the quotation marks.
<key>
A key on the VT-100 terminal or terminal emulator. For example <Enter>
denotes the Enter key.
Designating IP Address
Some commands require an IP address, which must be designated in a standard format. The
IP address format is 32 bits, written as four octets separated by periods (dotted decimal
format) that are made up of a network section, an optional subnet section, and a host section,
as shown in the following example:
192.168.0.1
Designating Port ID
Each telephony port of the ITG is assigned with an ID. Some commands require a telephony
port ID. The ITG assigned ID 0 to the first telephony port, ID 1 to the 2nd port, and so on.
Documentation Abbreviations
Throughout this document, the user will come across a number of abbreviations, some of
them
are commonly used in the industry and some are unique to the ITG. The user should be
familiar with the following abbreviations:
ATPM
Address Translation and Parsing Manager
CLI
Command Line Interface
DHCP
Dynamic Host Configuration Protocol
DIS
Digital Identification Signal
DNS
Domain Name System
DSP Digital Signal Processor