Planet Technology VIP-110 User Manual
Page 16
Utility Commands
4
tel erase_ivr
This command erases the greeting message that was recorded previously.
tel erase_ivr
Syntax Description
This command has no arguments or keywords
tel set ring_freq
The ITG rings FXS port for signaling an incoming call, and provide 4 types of ringing signal,
each having a unique frequency. This command is for selecting the frequency of the ringing
signal that the ITG sends to FXS ports.
tel set ring_freq {1 | 2 | 3 | 4}
Syntax description
1
Setting ring frequency to 17 Hz
2
Setting ring frequency to 20 Hz
3
Setting ring frequency to 25 Hz
4
Setting ring frequency to 50 Hz
Factory default
1- 17 Hz
Related Command
tel show ring_freq
tel show port
This command displays the hook status of a telephony port.
tel show port [port]
Syntax description
port ID of the telephony port. If not specified, hook status for all telephony ports
available will be displayed.
tel show ring_freq
This command displays the ringing frequency that was configured by the tel set ring_freq
command.
tel show ring_freq
Syntax description
This command has no arguments or keywords
Related Command
tel set ring_freq