Planet Technology VIP-110 - Manual (Page 26)

IP Configuration Commands 14
password PPPoE client user password. Up to 23 characters.
Factory default
User name: “”
User password: “”
net show ppp
This command displays PPP configuration parameters.
net show ppp
Syntax description
This command has no arguments or keywords
Configuring Dynamic DNS
The ITG implement a dynamic DNS client which allows a remote dynamic DNS server to alias
the IP address of the ITG to a static host name. Enabling dynamic DNS allows other gateways
to call the ITG using static host names the ITG registers to the dynamic DNS server. The
dynamic DNS feature is especially useful when the ITG operates under dynamic IP
environment (that is, in stead of using the static IP address user configured via CLI command
net set wan ip, the ITG obtains a dynamic IP address either via DHCP or PPPoE). There are
plenty of organizations providing dynamic DNS service. The ITG currently supports the
following dynamic DNS service providers:
Ÿ dyndns.org
Ÿ dtdns.com
To be able to obtain dynamic DNS services from these service providers, the ITG must have
obtained a dynamic DNS account, which is comprised of a host name, a user name and a
password from them.
The following sections describe commands for enabling/disabling the dynamic DNS client and
for configuring dynamic DNS related options.
net set ddns {on | off}
This command enables or disables the dynamic DNS client.
net set ddns {on | off }
Syntax description
on Enable dynamic DNS client
off Disable dynamic DNS client
Factory default
off