Planet Technology VIP-110 - Manual (Page 21)

IP Configuration Commands 9
Related Commands
net set wan ip
net set wan mask
net set wan ip
This command is used to assign a static IP address for the WAN interface
net set wan ip ip_addr
Syntax description
ip_addr IP address for the WAN interface
Factory default
172.16.0.1
Related Commands
net set wan gateway
net set wan mask
net set wan ip_tos
The ITG allows users to set the 8-bit Service Type field in the IP header for all the packets it
sends across the WAN interface. The Service Type field is broken down into five subfields,
among which four subfileds are user configurable. This command is used to set these
subfields.
net set wan ip_tos ip_preced [d] [t] [r]
Syntax description
ip_preced The 3-bit PRECEDENCE subfiled ranging from 0 through 7.
d The D bit subfield, either 0 or 1.
t The T bit subfield, either 0 or 1.
r The R bit subfield, either 0 or 1.
Factory default
ip_preced: 0
d: 0
t: 0
r: 0
net set wan mask
This command is used to assign the subnet mask for the WAN interface
net set wan mask mask
Syntax description
mask Subnet mask for the WAN interface.