Planet Technology VIP-110 - Manual (Page 29)

IP Configuration Commands 17
specified by command net set manager ip are allowed to connect
to ITG’s Telnet server via WAN interface.
Factory default
0.0.0.0
Related Commands
net set manager ip
net set manager password
This command is used to change the password for logging into ITG interface, web server or
Telnet server for configuring the ITG.
net set manager password password1 password2
Syntax description
password1 New password
password2 New password for ensuring the password is entered correctly.
password2 must be identical to password1, otherwise, the original
password remains unchanged.
Factory default
123
net set telnet
The ITG allows you to enable or disable its built-in Telnet server. This command is used to
enable or disable the Telnet server.
net set telnet {on | off}
Syntax description
on Enable Telnet server. This allows users to access the ITG from
Telnet client.
off Disable Telnet server.
Factory default
on
net show management
This command displays management options.
net show management
Syntax description
This command has no arguments or keywords