Planet Technology VIP-110 - Manual (Page 27)

IP Configuration Commands 15
net set ddns add
For the dynamic DNS server to be able to translate a static host name to an IP address, the
ITG has to register to it upon reset. To register to the dynamic DNS server, the ITG needs to
convey to the server the following information:
Ÿ Name of the dynamic DNS server
Ÿ Host name of the ITG
Ÿ User name of the account the ITG uses to login to the dynamic DNS server
Ÿ Password of the account the ITG uses to login to the dynamic DNS server
This command sets the above parameters for the ITG to register to the dynamic DNS server.
net set ddns add server_name host_name user_name password
Syntax description
server_name Dynamic DNS server’s name. Servers currently supported by the
ITG include:
Ÿ dyddns.org
Ÿ dtdns.com
host_name Host name of the ITG
user_name User name of the account the ITG users to login to the dynamic
DNS server
password Password of the account the ITG users to login to the dynamic
DNS server
Once registered to the dynamic DNS server, the ITG may be address by other
gateways by host name host_name.server_name. For example, if the ITG has
registered to dynamic DNS server dyndns.org with a host name abc, the ITG may be
addressed by host name abc.dyndns.org.
net set ddns del
This command is user to delete a previously added dynamic DNS server, so that the ITG will
not register to it again.
set ddns del {server_name | all}
Syntax description
server_name Domain name of the dynamic DNS server to be deleted.
all Delete all the configured dynamic DNS information.
net show ddns
This command displays dynamic DNS client configuration parameters.
net show ddns
Syntax description