Planet Technology VIP-110 - Manual (Page 61)

Configuration Management Command 49
8. Dial Plan Management Commands
The dial plan is a database, that the Address Translation and Parsing Manager (ATPM)
of
the ITG looks up for translating a dial string to a destination. The dial plan management
commands allow you to modify and display the dial plan. Commands that change the dial
plan are only allowed when the ITG is in the database update state. This chapter describes
the dial plan management commands.
This chapter is organized as follows:
l Database update control commands
l Destination table management commands
l Hunt group table management commands
l Address table management commands
l Dialling control commands
Database Update Control Commands
atpm done
This command ends the dial plan update session and re-enables the address translation.
atpm done
Syntax description
This command has no arguments or keywords
Allowed only in database update mode
No
Related Command
atpm req
atpm erase
This command erases the dial plan database from the non-volatile memory.
atpm erase
Syntax description
This command has no arguments or keywords
Allowed only in database update mode
No
atpm purge
This command deletes all entries from the dial plan database.