Planet Technology VIP-110 - Manual (Page 28)

IP Configuration Commands 16
This command has no arguments or keywords
Configuring Management Options
The ITG has built-in HTTP server and Telnet server, allowing the configuration from web
browser or Telnet client. This section describes commands for setting and displaying the
management options.
net set http
The ITG allows users to enable or disable its built-in HTTP server. This command is used to
enable or disable the HTTP server.
net set http {on | off}
Syntax description
on Enable HTTP server. This allows users to manage the ITG from
web browser.
off Disable HTTP server.
Factory default
on
net set manager ip
The built-in Telnet server allows the ITG to be configured from remote Telnet clients. Telnet
clients in internal network are always allowed to connect to the ITG’s Telnet server. Clients in
external network are allowed to connect to the Telnet server only if they are among the list of
trusted clients. This command, along with command net set manager mask, is used to specify
the Telnet clients that are allowed to connect to the ITG’s Telnet server from WAN interface.
net set manager ip ip_address
Syntax description
ip_addr IP address of the Telnet client that is allowed to connect to the
ITG’s Telnet server from WAN interface. If 0 is specified, clients
with whatever address are allowed to connect to the Telnet server.
Factory default
0.0.0.0
Related Commands
net set manager mask
net set manager mask
This command, along with command net set manager ip, is used to specified the Telnet
clients that are allowed to connect to the Telnet server from WAN interface.
net set manager mask subnet_mask
Syntax description
subnet_mask Subnet mask. Telnet clients in the same subnet as the one
specified by command net set manager ip are allowed to connect