Printronix L1524 - Manual (Page 111)

A–1 Specifications
A
Specifications
Original Manufacturer Supplies
Consumables design, specification, and selection are critical and integral to the
development of any computer printer imaging system.
For the name of your nearest full service distributor, please call:
United States (800) 733–1900
Europe (33)1–46–25–1900
Singapore (65) 546–4116
The yield of the supplies is based on a 5% page coverage using 20 lb bond
paper. In a typical business letter, for example, text covers about 5% of the page
using 20 lb bond paper. However, applications that print more densely, such as
graphics and bar codes, will use up the consumables at a faster rate.
In addition, the type of media used will determine the yield of the consumables.
Optimum print quality and consumable life is obtained by using bond media rated
between 18 and 20 pounds. Label stock and heavier media can also be used, but
the print quality and consumable life, as well as the life of the fuser, may be
reduced.
Toner Kit (704539–006):
Cleaner Felt (2 per kit) 8,000 pages (see note below)
Toner Bottle (2 per kit) 8,000 pages (at 5% page coverage)
Waste Toner Container 8,000 pages
OPC Drum Unit (704539–008) 30,000 pages
Fuser Felt – (704539–011)
NOTE: Normally, the fuser cleaner felt should be replaced every 8,000
pages. However, to ensure optimum print quality, you may want to
replace it more often (e.g., every 6,000 pages). Call the number
shown above to order additional cleaner felts. They are available in
10–packs only. The part number for the 10–pack is 704539–011.