Printronix L1524 - Manual (Page 93)

3–53 Configuring the Printer
5. To convert a font file, enter the following at the DOS prompt on the
computer, for example:
CNVT2FLS custom.sf custom.dwn custom.sf A FONT <Return>
where custom.sf is the name of one of the font files you want to
convert. This command converts the specified font file, creating the
downloadable file custom.dwn .
6. Repeat step 5 for any additional font files to be converted.
7. To convert a setup file, enter the following at the DOS prompt, for
example:
CNVT2FLS setup.ptx setup.dwn setup.ptx A <Return>
where setup.ptx is the name of one of the setup files you want to
convert. This command converts the specified setup file, creating the
downloadable file setup.dwn .
8. Repeat step 7 for any additional setup files to be converted.
9. To convert other kinds of files (a logo or form file, for example), enter the
following at the DOS prompt, for example:
CNVT2FLS my_logo.xxx my_logo.dwn my_logo.lgo A <Return>
where my_logo.xxx is the name of one of the form or logo files you
want to convert. This command converts the specified logo or form file,
creating the downloadable file my_logo.dwn .
10. Repeat step 9 for any additional logo and form files to be converted.
11. Proceed to the next section to download the converted files.
IMPORTANT
Be sure that you always enter the “A” parameter on the CNVT2FLS
command line, as indicated above.