Printronix L1524 - Manual (Page 62)

3–22 Configuring the Printer
IGP/PGL Emulation for LaserLine Printers Programmer’s Reference Manual
IGP/VGL Emulation for LaserLine Printers Programmer’s Reference Manual
IPDS Emulation for LaserLine Printers Programmer’s Reference Manual
CTHI Emulation for LaserLine Printers Programmer’s Reference Manual
Host Interface Menu
IEEE 1284
Host
Interface
Centronics* Dataproducts
Ethernet 1
Autoswitching Coax Twinax
* = Factory Default
1 =Available when an Ethernet
Adapter is present
Serial
Available only
in CT option
Available only
in CT option
Figure 3–5. Host Interface Menu
The Host Interface Menu enables you to select and configure one of many types
of interfaces between the printer and your host computer. The currently selected
interface is indicated with an asterisk on the control panel message display. Each
interface has its own submenu with a set of interface parameters which can be
configured.
IMPORTANT
When switching between Twinax, Coax, or Auto Switching, the printer will
load the power–up configuration and the new interface parameters. Any
settings made and not saved before selecting these interfaces are lost.