Printronix L1524 - Manual (Page 99)

3–59 Configuring the Printer
42. If you have any more software to install (logo, form, TIFF, setup, or font
files), go back to step 32.
43. When all of the new software has successfully loaded into memory and
the printer has reset itself, set the printer power switch to O (off).
44. Remove the diskette(s) from the computer and store them with the
printer.
45. If you had to install a parallel data cable to the computer and printer in
step , continue with step 46. If not, skip to step 51.
46. Unplug the printer AC power plug from its electrical outlet.
47. Power off the computer.
48. Disconnect the parallel data cable from the computer and from the
printer.
49. Reconnect the data input cable(s) to the printer, if required.
50. Plug the printer AC power plug into its electrical outlet.
51. Set the printer power switch to | (on). If the printer is online, press the
ON LINE key to place the printer on line. Press the UP + DOWN keys
(or the key combination selected by the user) simultaneously to unlock
the ENTER key.
52. Using the configuration printout you made in step 3, restore the printer
configuration(s).
53. Press the UP + DOWN keys (or the key combination selected by the
user) simultaneously to lock the ENTER key.
54. Press the ON LINE key to place the printer on line.