Printronix L1524 - Manual (Page 31)

2–13 Setting Up the Printer
Install the Fuser Cleaner Felt
1. Remove one of the fuser cleaner felts from the toner kit box.
2. Remove the fuser cleaner felt from its plastic wrapping.
3. Lift the cleaner felt cover on the fuser unit. If the cleaner felt cover comes
off, simply slide the shafts into the appropriate openings in the fuser unit.
(See Figure 2–7.)
4. Carefully slide the fuser cleaner felt into the opening on the top of the
fuser unit.
5. Close the cleaner felt cover.
Fuser Cleaner
Felt Cover (shown
in the open position)
Fuser Cleaner Felt
Figure 2–7. Installing the Fuser Cleaner Unit