Printronix L1524 - Manual (Page 39)

2–21 Setting Up the Printer
7. Temporarily remove the OPC drum in order to remove the waste toner
container.
NOTE: The waste toner container is recyclable. A recycling shipping label is
provided, with instructions attached, in the toner box.
8. Place the green cap on the filler hole of the waste toner container and
remove it from the printer and package it for recycling.
9. Install the OPC Drum in the printer.
10. Always carry the printer and developer unit upright.
Long Distance Transport
1. Pack all connecting cables in a plastic bag.
2. Put the developer unit in appropriate packaging for recycling.
3. Put the OPC drum unit in appropriate packaging for recycling.
4. Using a towel and a toner vacuum, remove residual toner from inside
the printer.
CAUTION
Failure to secure the fuser pressure roller for shipment can cause
permanent damage to the printer.
The fuser must be cool before proceeding further.
5. Secure the fuser pressure roller (lower roller) to prevent it from bouncing
during shipment. Insert the original foam pad between the fuser rollers.
NOTE: If the original foam pad is not available for use, use bubble wrap or
other foam packing material to secure the lower fuser roller.
NOTE: Replacement packaging material can be procured from your
authorized representative.
6. Use original packing material if available. Otherwise, use sufficient
shock-absorbing packaging material.
7. Secure the top and front covers to keep them from opening.
8. At the new site, install a new developer unit and waste toner container.