Panasonic 1200N - Manual (Page 106)

MAT and NMS Maintenance and Operations
9-2 Centillion 1200N ATM Switch User Manual
NTP 297-8103-903
MAT and NMS
The primary functions that can be used from a MAT and NMS are as listed below.
MAT
■ Initialize the system
■ Input system configuration data
■ Set, delete, or display PVC (including connection with NMS)
■ Set, delete, or display SVC routing table
■ Display system alarm and line alarm
■ Display the operation status of a line card
■ Display the types of line cards mounted
NMS
■ Display/set PVC
■ Display system alarm and line alarm
■ Display the operation status of a line card
■ Display the types of line cards mounted
■ Display SVC (number of connections only)
■ Monitor traffic
■ Display trap
MAT The ATM Switch is mainly controlled by commands sent from an external MAT
connected via RS-232C interface.
Any terminal equipped with an RS-232C port and communications capability may
be used as the MAT.
MAT may be connected when necessary or left connected to the ATM Switch.
However, note that the ATM Switch will not automatically display messages on
MAT other than when power is turned on or the ATM Switch is reset.
Also note that RS-232C cross cable for connecting the MAT and communication
software is not supplied with the ATM Switch.