Panasonic 1200N - Manual (Page 90)

Setting System Configuration Data Installation
7-20 Centillion 1200N ATM Switch User Manual
NTP 297-8103-903
Follow the instructions below when using the equipment in a country or region
where it must conform to EMI EN55022 Class B.
■ Coaxial cable
Install near the connector a ferrite core so the cable makes a loop. (See Figure
number 7-14.)
■ UTP cable
Install near the connector a ferrite core so the cable makes a loop. (See Figure
number 7-14.)
■ AC power cable
Install near the connector a ferrite core so the cable makes a loop. (See Figure
number 7-14.).
■ RS-232C cable
❑ Use a metal connector.
❑ Use a shielded cable.
❑ Securely fasten the metal connector to the main unit.
■ Do not use DS3, 6.3M interface cards.
NOTE