Turning power on and off, Connecting the power cable, Turning power on and off -15 – Panasonic 1200N User Manual
Page 85: Connecting the power cable -15
Installation
Turning Power On and Off
Centillion 1200N ATM Switch User Manual
7-15
NTP 297-8103-903
Turning Power On and Off
This section describes the procedures for connecting the power cable to the ATM
Switch and the procedures for turning the power on and off.
Connecting the
Power Cable
Make sure the power unit fastening screw on the back of the ATM Switch is
properly screwed. Connect the power cable to the power connector and the other
end of the cable to power supply, for example, the power outlet.
Figure 7-12: Connecting the Power Cable
DC power cable : White (0V), Brack (-48V), Green(FG)
Since maximum power consumption is large, be sure to draw power directly from
an outlet. Never share the same outlet with other devices. Never connect the
ground wire to a gas pipe.
NOTE