Panasonic 1200N - Manual (Page 71)

Centillion 1200N ATM Switch User Manual 7-1
NTP 297-8103-903
Installation
This section describes procedures for installing the ATM Switch.
Figure 7-1: Procedures for Installing the ATM Switch
7
Move to installation site
Connect the cables
Turn on the power
Set data
Check operation
Begin operation
Check the contents of the package and move the ATM
Switch to installation site or mount on optional chassis.
Connect the cables (communications power cable
and RS 2320 cable) to the ATM Switch. Connect
MAT to the other end of the RS-232C cable.
Insert the PCMCIA card into the ATM Switch.
Turn on the power.
Set the system configuration data. For details, refer
to Command Manual.
Run operation test to make sure the ATM Switch is
running properly.