Toff, Topology aggregation, Topology attribute – Panasonic 1200N User Manual

Page 241: Topology constraint, Topology database, Topology metric, Topology state parameter, Tp-mic, Tpcc

Advertising
background image

Glossary

T

Centillion 1200N ATM Switch User Manual

B-79

NTP 297-8103-903

TOF

Time Out Factor: An ABR service parameter, TOF controls the maximum time
permitted between sending forward RM-cells before a rate decrease is required. It
is signaled as TOFF where TOF=TOFF+1. TOFF is a power of 2 in the range: 1/8
to 4,096.

TOFF

Time Out Factor: Refer to TOF.

Topology Aggregation

The process of summarizing and compressing topology information at a
hierarchical level to be advertised at the level above.

Topology Attribute

A generic term that refers to either a link attribute or a nodal attribute.

Topology Constraint

A topology constraint is a generic term that refers to either a link constraint or a
nodal constraint.

Topology Database

The database that describes the topology of the entire PNNI routing domain as seen
by a node.

Topology Metric

A generic term that refers to either a link metric or a nodal metric.

Topology State Parameter

A generic term that refers to either a link parameter or a nodal parameter.

TP-MIC

Twisted-Pair Media Interface Connector: This refers to the connector jack at the
end user or network equipment that receives the twisted pair plug.

TPCC

Third Party Call Control: A connection setup and management function that is
executed from a third party that is not involved in the data flow.

Advertising