Sts-1, Sts-n, Sts-nc – Panasonic 1200N User Manual

Page 235: Sublayer, Subnet, Subnetwork

Advertising
background image

Glossary

S

Centillion 1200N ATM Switch User Manual

B-73

NTP 297-8103-903

STP

Signaling Transfer Point: A high speed, reliable, special purpose packet switch for
signaling messages in the SS7 network.

STP

Shielded Twisted Pair: A cable containing one or more twisted pair wires with each
pair having a shield of foil wrap.

STS

Start Synchronous

STS-1

Synchronous Transport Signal 1: SONET standard for transmission over OC-1
optical fiber at 51.84 Mbps.

STS-n

Synchronous Transport Signal “n:” (where n is an integer) SONET standards for
transmission over OC-n optical fiber by multiplexing "n" STS-1 frames, (e.g., STS-
3 at 155.52 Mbps STS-12 at 622.08 Mbps and STS-48 at 2.488 Gbps).

STS-nc

Synchronous Transport Signal "n" concatenated: (where n is an integer) SONET
standards for transmission over OC-n optical fiber by multiplexing "n" STS-1
frames, (e.g., STS-3 at 155.52 Mbps STS-12 at 622.08 Mbps and STS-48 at 2.488
Gbps but treating the information fields as a single concatenated payload).

Sublayer

A logical sub-division of a layer.

Subnet

The use of the term subnet to mean a LAN technology is a historical use and is not
specific enough in the MPOA work. Refer to Internetwork Address Sub-Group,
Direct Set, Host Apparent Address Sub-Group and One Hop Set for more specific
definitions.

Subnetwork

A collection of managed entities grouped together from a connectivity perspective,
according to their ability to transport ATM cells.

Advertising