Panasonic 1200N - Manual (Page 117)

Centillion 1200N ATM Switch User Manual 10-1
NTP 297-8103-903
Modifications
This chapter describes the procedures for moving the ATM Switch to another
location, replacing mounted packages, upgrading software, and adding hardware.
Moving the Equipment
This section describes the procedures for moving the ATM Switch to another
location.
1. Turn off the power switch of the ATM Switch and remove the power cable.
If the power unit is redundant, be sure to remove both cables.
2. Remove the communication cable connector from the ATM Switch.
3. Move the ATM Switch to the new installation site. Make sure in advance that
the installation site meets the installation environmental condition. Refer to
"Installation Conditions" on page 7-2 .
10
NOTE