Panasonic 1200N - Manual (Page 110)

MAT and NMS Maintenance and Operations
9-6 Centillion 1200N ATM Switch User Manual
NTP 297-8103-903
Communications
Software A dumb terminal may be used as MAT, but when using a personal computer or
workstation as MAT, it is recommended that you use communication software
compatible to the hardware model you are using.
Setting the MAT
Turn on the power switch of the MAT. Set the communications parameters of the
MAT as follows. For instructions on setting the parameters, refer to the manual on
the installed communications software.
■ Line rate: 9600 Bps
■ Character bit length: 8 bits
■ Stop bit length: 1 bit
■ Parity: None
■ Flow control: Yes
MAT Screen Display
MAT's standard screen size is a text screen of 80 × 24 lines.
All the commands entered by the user and the responses to the commands are
scroll-displayed on the same screen.
In the event the screen size of the commands and responses combined exceeds 24
lines, the screen will stop to scroll. Scroll can be resumed by pressing any key
except “Q”.
The number of lines displayed on the screen can be changed by using the
SET scroll command.