Panasonic 1200N - Manual (Page 136)

Upgrading Software Modifications
10-20 Centillion 1200N ATM Switch User Manual
NTP 297-8103-903
FLASH_UP Mode
Load the software from the ATA card mounted in the PCMCIA slot #0. The office
data is loaded from the ATA card mounted in the PCMCIA slot #1. Office data is
not saved.
Figure 10-24: FLASH_UP Mode
Procedure
1. Turn off the power of the ATM Switch.
2. Insert the new version ATA card in PCMCIA slot #0 and the ATA card
containing the office data you wish to continue to use in PCMCIA slot #1.
3. Turn on the power of the ATM Switch and start the boot monitor.
4. Set the boot mode as follows:
BOOT# SET boot flash_up
5. End the boot monitor:
BOOT# QUIT