NEC PlasmaSync 42PD3 - Manual (Page 11)

P LASMA M ONITOR Ⅵ Ⅵ Ⅵ †
11
Part Names and Functions
AUDIO
OUT
LR
AUDIO
IN
2
L( MONO
)
R
VIDEO
OUT S -VIDEO
VIDEO
AUDIO I
N 1
EXTERNAL CONTROL
RGB 1
L (MONO
)
R
IN
IN
OUT IN
OUT IN
RGB 2
/DVD
/HD
G /Y
B /C
B /P
B
H /CS
V
R /C
R /P
R
REMOTE
RGB 3
IN
OUT
C /L
IN
AC I
N
Terminal Panel
q AC IN connector
Connects with the supplied power cable.
w CONTROL LOCK
When "CONTROL LOCK" is set to "ON", the buttons on the
set's front bezel control panel do not function.
e REMOTE (Mini jack)
IN jack: When you use the remote control with a wire, attach it
here.
OUT jack: You can use this jack to output the remote control
signal from the REMOTE IN jack.
* This is used when operating multiple monitors (this plasma moni-
tor) with a single remote control.
r EXTERNAL CONTROL (mini D-Sub 9 pin)
IN connector: Use when operating the plasma monitor from
the optional equipment with EXTERNAL CONTROL.
OUT connector: You can use this connector to output the sig-
nal from the EXTERNAL CONTROL IN connector.
t AUDIO OUT
You can use this jack to output the audio signal from the AU-
DIO IN 1 or 2 jack.
y AUDIO IN 2
This is your audio input from your equipment such as a com-
puter, VCR or DVD player.
u VIDEO
VIDEO IN connector (BNC): Here is where you connect a
composite video signal.
VIDEO OUT connector (BNC): You can use this connector to
output the composite video signal from the VIDEO IN connector.
S-VIDEO IN connector (DIN 4 pin): Here is where you con-
nect the S-video (Y/C separate signal).
S-VIDEO OUT connector (DIN 4 pin): You can use this con-
nector to output the S-video signal from the S-VIDEO IN connector.
i AUDIO IN
This is your audio input from your equipment such as a com-
puter, VCR or DVD player.
o RGB 1 IN (mini D-Sub 15 pin)
Connect the analog RGB signal of a personal computer or other
RGB equipment.
!0 RGB 2/DVD/HD
[G/Y, B/Cb/Pb, R/Cr/Pr, H/CS, V] (BNC)
IN connector: Connect the analog RGB signal or other RGB
equipment.
The H/V composite signal is connected to the H/CS connec-
tor. Also this connects with your equipment such as a DVD
player and HDTV laser disk player. A Sync-on-Green signal
can be connected to the G/Y connector
OUT connector: You can use this connector to output the sig-
nal from the RGB 2/DVD/HD IN connector.
!1 RGB 3 IN (DVI-I 29 pin)
Connects a digital RGB signal of a personal computer with a
digital RGB output.
* This connector does not support analog input.