NEC PlasmaSync 42PD3 - Manual (Page 33)

P LASMA M ONITOR Ⅵ Ⅵ Ⅵ †
33
4
1 Align the cursor with
2
3
Move the cursor left and right with
the POSITION/CONTROL
ᮤ ᮣ
buttons.
INPUT SELECT
RGB2
SCART
VIDEO
: RGB
: OFF
: BNC
INPUT SELECT
RGB2
SCART
VIDEO
: RGB
: OFF
: BNC
Align the cursor with the desired item
Adjust with the POSITION/CONTROL
ᮤ ᮣ buttons
Move the cursor up and down with
the POSITION/CONTROL
▲▼
buttons.
Press the EXIT button 2 times
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
Input Selection (INPUT SELECT)
This performs RGB 2 input selection and sets the SCART jack and VIDEO connector.
Preparation Press the PROCEED button to display the main menu.
●RGB 2
Selects the signal connected to the RGB 2/DVD/HD IN con-
nector.
[RGB]
: Set at time of RGB signal input
[DVD/HD] : Set at time of DVD/HD signal input
●SCART
[OFF]
: Set so that the SCART jack is not connected
[ON] : Set to connect the SCART jack
* The SCART jack is not used in the United States. Normally
select [OFF].
If you select [ON], images will not be correctly displayed.
●VIDEO
Select the connector that is assigned to the VIDEO input.
[BNC]
: The setting is to the VIDEO IN connector.
[S-VIDEO] : The setting is to the S-VIDEO IN connector.