NEC PlasmaSync 42PD3 - Manual (Page 39)

P LASMA M ONITOR Ⅵ Ⅵ Ⅵ †
39
4
4
Menu Display Position Adjustment
(OSM LOCATION)
This sets the display position of the menu and the display format (landscape or portrait) as well as the display time.
Set [OSD MODE] to [PRO] on the configuration menu, then perform the following operations.
Preparation Press the PROCEED button to display the main
menu.
1 Align the cursor with
2
3
Move the cursor left and right with
the POSITION/CONTROL
ᮤ ᮣ
buttons.
OSM H-POS
OSM V-POS
OSM ANGLE
OSM DISPLAY TIME
OSM H-POS
OSM V-POS
OSM ANGLE
OSM DISPLAY TIME
Align the cursor with the desired item
Adjust with the POSITION/CONTROL
ᮤ ᮣ buttons
Move the cursor up and down with
the POSITION/CONTROL
▲▼
buttons.
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
[OSM H-POS] : Adjusts the horizontal position of the menu display.
[OSM V-POS] : Adjusts the vertical position of the menu display.
[OSM ANGLE] : Sets the menu display format (to landscape [HOR]/
portrait [VER]).
[OSM DISPLAY TIME] : Sets the menu display time.
3 Align the cursor with OSM DISPLAY
TIME
5
Move the cursor up and down with
the POSITION/CONTROL
▲▼
buttons.
OSM H-POS
OSM V-POS
OSM ANGLE
OSM DISPLAY TIME
SECONDS:
5 10 30 60 120
Set the time with the POSITION/CONTROL
ᮤ ᮣ buttons
Press the EXIT button 2 times
[5] : 5 seconds [60] : 60 seconds
[10] : 10 seconds [120] : 120 seconds
[30] : 30 seconds
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
When the OSM DISPLAY TIME has been selected (Display Time Setting)
This function permits setting the time until the menu display is au-
tomatically deleted (in the absence of input operations).
Press the EXIT button 2 times