NEC PlasmaSync 42PD3 - Manual (Page 49)

P LASMA M ONITOR Ⅵ Ⅵ Ⅵ †
49
Appendix
Placing the Remote Control into the Remote Control Holder
The remote control can be stored away in the remote control holder when not in use.
1
2
Insert the bottom portion of the remote control into the bottom
portion of the remote control holder.
Insert the upper portion of the remote control into the upper por-
tion of the remote control holder. (Insert until an engagement
click is heard.)
1
2
Lift the upper portion of the remote control.
Disengage the lower part of the remote control from the remote
control holder.
POWER O FF
RGB 1
POWER ON
RGB 3
RGB 2/D VD/HD
VIDEO EXIT
PROCEE D POSITIO N/CONTROL
RP-102
Removing the Remote Control