NEC PlasmaSync 42PD3 - Manual (Page 23)

P LASMA M ONITOR Ⅵ Ⅵ Ⅵ †
23
Icon Configuration menu Sub menu Adjustment settings Page
(None)
Sets whether or not the main menu is displayed.
Sets whether or not the second screen of the main menu
is displayed.
Sets whether or not wireless transmission of the remote
control is enabled.
Sets the sync signals that will be automatically selected.
Sets the brightness of the screen when there are multiple
screens.
Returns all adjustments and settings of CONFIG MENU to
the factory default values. CONFIG MENU
(Configuration menu)
To display this menu, press
and hold the
▲ button and
the PROCEED button at the
same time for 3 seconds or
longer on the main unit.
OSD DISPLAY
OSD MODE
WIRELESS REMOTE
CONTROL
SYNC MODE
PLE LINK
ALL RESET
26
26
26
26
26
26
Menu Operations (On-screen Menu)
Use of the on-screen menu (OSM) function allows the setting of a variety of detailed adjustments. The adjustment settings are retained
even when the power is switched off.
The on-screen menu (OSM) function displays a menu on the screen from which the adjustments are made.
Ⅵ List of Setting Details
SOUND
(Audio settings)
VOLUME
BALANCE
MUTE
INPUT1
INPUT2 Volume adjustment
Left-right balance adjustment
Mute setting
Sets audio input to AUDIO IN 1
Sets audio input to AUDIO IN 2 27
27
27
27
27
VISUAL CONTROL
(Picture adjustments)
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
TINT Screen brightness adjustment
Image contrast adjustment
Image sharpness adjustment
Adjustment of color saturation
Tint adjustment 28
28
28
28
28
Main Menu Page 1 Items (OSD MODE : BASIC and PRO)
AUTO PICTURE
(Auto picture/Wide screen
settings)
AUTO PICTURE
INPUT MODE
RGB MODE
WIDE MODE
PICTURE ADJ
FINE PICTURE
Sets the automatic adjustment of the clock frequency/clock phase.
This is set when switching of input signal discrimination is
required.
Sets the mode (moving picture/still picture mode) to suit
the input signal.
WIDE MODE setting
Adjusts the clock frequency.
Adjusts the clock phase. 29
29
29
30
29
29
H-POSITION
(Horizontal position adjustment) H-POSITION
H-WIDTH Horizontal position adjustment of the screen
Screen width adjustment 32
32
INPUT SELECT
(Input selection)
RGB2
SCART
VIDEO
RGB signal or DVD/HD signal setting
Sets whether or not the SCART jack is connected.
(not used in the United States.)
Sets the connector that is assigned to video input. 33
33
33
NORMAL
(Standard settings)
ALL RASTER NORMAL
ALL VISUAL NORMAL
ALL NORMAL
Returns the horizontal/vertical position and other adjust-
ments of the screen to the default settings.
Returns the audio settings, picture, and color temperature
adjustments to the default settings.
Returns all adjustments and setting to default values. 34
34
34
(To Page 2)
Setting [OSD MODE] to [PRO] on the configuration menu
displays the second page of the main menu.
V-POSITION
(Vertical position adjustment) V-POSITION
V-HEIGHT Vertical position adjustment of the screen
Screen height adjustment 32
32
Icon Main menu Sub menu Adjustment settings Page