NEC PlasmaSync 42PD3 - Manual (Page 61)

P LASMA M ONITOR Ⅵ Ⅵ Ⅵ †
61
Appendix
41. MULTI MODE Request
Function
The master monitor requests the status of
MULTI MODE of the slave for master.
Transmission data
0FH UA1 UA2 3BH 00H CKS
ACK
6FH UA1 UA2 3BH 02H DATA–02 CKS
DATA00 : SCREEN DIVIDER SETTING
01H : Single mode
02H : -
03H : Multi mode 4 screens
04H : Multi mode 9 screens
DATA01 : POSITION OF DIVIDE
NOTE: When DATA00 is 01H, this data is invalid.
01H : Upper left selected (4 screens)
02H : Upper right selected (4 screens)
03H : Lower right selected (4 screens)
04H : Lower left selected (4 screens)
05H : -
06H : -
07H : Top left selected (9 screens)
08H : Top middle selected (9 screens)
09H : Top right selected (9 screens)
0AH : Middle left selected (9 screens)
0BH : Middle center selected (9 screens)
0CH : Middle right selected (9 screens)
0DH : Bottom left selected (9 screens)
0EH : Bottom middle selected (9 screens)
0FH : Bottom right selected (9 screens)
42. OSM Select
Function
The external equipment switches the on-screen
menu (OSM) of the display unit ON and OFF.
Transmission Data
DFH 80H 60H 58H 01H DATA00 CKS
DATA00
01H : OSM ON (During normal operation)
02H : OSM OFF
ACK
7FH 60H 80H 58H 01H DATA00 CKS
DATA00
01H : OSM ON
02H : OSM OFF
* Use this command with the setting of bits 0
and 1 fixed as follows: bit 0 = 1, and bit 1 = 1.
* ACK should be ignored in the case of a cas-
cade connection.
43. VOLUME Gain Data
Function
The master monitor changes the volume gain
data of the slave.
Transmission data
CFH UA1 UA2 21H 03H DATA00–02 CKS
DATA00 : VOLUME Gain
00H : 0
|
18H : 24
DATA01 : BALANCE Gain
E8H : -24
|
00H : 0
|
18H : +24
DATA02 : MUTE
00H : OFF
01H : ON
ACK
6FH UA1 UA2 21H 03H DATA00–02 CKS
DATA00 : VOLUME Gain
DATA01 : BALANCE Gain
DATA02 : MUTE
44. SOUND INPUT Select
Function
The master monitor changes the audio input of
the slave.
Transmission data
CFH UA1 UA2 05H 02H DATA00–01 CKS
DATA00 : INPUT1
00H : VIDEO
01H : RGB1
02H : RGB2, DVD/HD, SCART
03H : RGB3
DATA01 : INPUT2
00H : VIDEO
01H : RGB1
02H : RGB2, DVD/HD, SCART
03H : RGB3
ACK
6FH UA1 UA2 05H 02H DATA00–01 CKS
DATA00 : INPUT1
DATA01 : INPUT2
45. VOLUME Gain Data Request
Function
The master monitor changes the VOLUME gain
data of the slave.
Transmission data
0FH UA1 UA2 46H 00H CKS
ACK
DATA00 : VOLUME Gain
00H : 0
|
18H : 24
DATA01 : BALANCE Gain
E8H : -24
|
00H : 0
|
18H : +24
DATA02 : MUTE
00H : OFF
01H : ON
46. SOUND INPUT SELECT Request
Function
The master monitor requests the status of the
audio input of the slave.
Transmission data
0FH UA1 UA2 60H 00H CKS
ACK
6FH UA1 UA2 60H 02H DATA00–01 CKS
DATA00 : INPUT1
00H : VIDEO
01H : RGB1
02H : RGB2, DVD/HD, SCART
03H : RGB3
DATA01 : INPUT2
00H : VIDEO
01H : RGB1
02H : RGB2, DVD/HD, SCART
03H : RGB3