NEC ExpressA1160 User Manual
Page 219
Advertising
Memory Board (CRU)
11-23
Removing the Memory Board
Lift the blue handle on the memory board and slide the board out of the cell.
Figure 11-19 Removing the Memory Board
11.13.2. Memory Board Replacement Steps
Use the following steps to replace a memory board.
1. Replace the memory board.
2. Replace the fan module.
3. Power up the partition if you removed power. Refer to
6.3.2 Powering Up or
Powering Down Partitions Using EXPRESSSCOPE® Monitor Interface
.
Replacing the Memory Board
Advertising